1500 Membrane Filter Press
1500 Filter press" Rack: Rack is used to support the compressing mechanism, filtering mechanism, plate pulling and discharging mechanism, liquid collection and plate turning mechanism, consisting of push plate, thrust plate, head-tail plate and girder. (1) Push plate: It is used to compress...
1500 Filter press"
Rack is used to support the compressing mechanism, filtering mechanism, plate pulling and discharging mechanism, liquid collection and plate turning mechanism, consisting of push plate, thrust plate, head-tail plate and girder.
(1) Push plate: It is used to compress filter plate, and is installed with rollers at both sides for supporting and positioning when the girder moves forward and backward.
(2) Thrust plate: It is used for pressing and position limitation of filter plate. There are feed inlet in the middle, washing holes in the upper two corners and liquid outlet channels in the lower two corners.
(3) Girder: It is a kind of guide rail for support and action of filter plate; epoxy, rigid polyvinyl chloride or stainless steel will be used for packages as required by the customers to adapt to be used at various corrosive positions.
Enhanced Polypropylene Plate Chamber Filter Press Detail List
filter chamber volume
Filter plates amount
Total thickness of filter plates
Inner length of girder
Total length of girder
Power of motor
Recessed plate filter press
A recessed plate filter press is made up of polypropylene squares at about 2 to 4 feet across with a concave depression and a hole in the center of each. Two plates join together to form a chamber to pressurize the slurry and squeeze the filtrate out through the filter cloth lining in the chamber. It is capable of holding 12 to 80 plates adjacent to each other, depending on the required capacity. When the filter press is closed, a series of chambers is formed. The differences with the plate and frame filter are that the plates are joined together in such a way that the cake forms in the recess on each plate, meaning that the cake thickness is restricted to 32mm unless extra frames are used as spacers.However, there are disadvantages to this method, such as longer cloth changing time, inability to accommodate filter papers, and the possibility of forming uneven cake.